In 6 steps to your Gripper
With this configurator you have the possibility to create your individual gripper in only 6 steps. From the selection of the workpiece to the application to vacuum generation and flange connection, we support you with the individual configuration.
- Intuitive and fast configuration of the gripper to suit your workpiece
- Low weight and high cycle times thanks to additive manufactured gripper
- Suitable for use on Cobots due to integrated air ducting
- Preconfigured flange plates for common robot types
Select your Workpiece
You can define your workpiece by setting parameters or upload a STL file.
Here you can upload your workpiece (max. 350 x 350 x 350 mm) in STL file format.
Rotate your workpiece in steps of 45° along x, y and z axis to the right or the left.
Definition of Application
Theoretical Holding Force: 0.0 N
Selection of Suction Cup Position
This gripper is automatically generated on the basis of your entries for the workpiece and the application. You have the option to display this gripper or move the suction cups on the workpiece.
With the entered parameters (50mm x 80mm x 60mm, 10000g) no gripper can be constructed.
This function enables you to position the individual suction cups freely on the workpiece. Click on the position on the workpiece where you want to place the suction cup. You can only move the workpiece freely again after deactivating free positioning.
Required Suction Rate: 0.0
Select type of vacuum generator
The selection of the vacuum generator has an effect on the geometry of the gripper.
Select the right flange for your gripper
Select the robot manufacturer that you want to use in combination with the gripper.
Select the robot type that you want to use in combination with the gripper.
Note: You have selected the universal flange. With this flange plate, you can drill the holes yourself to suit your connection.